Wyse, Other Terminals

A computer terminal is an electronic or electromechanical hardware device that is used for entering data into, and displaying data from, a computer or a computing system. Typically it provides a text terminal interface over a serial line. more...

Home
Cables, Connectors
Filers, Load Balancers
Home Networking, Cable & DSL
Hubs
KVM Switch Boxes, Cables
Mainframe, DEC, VAX, AS/400
Network Interface Cards,...
Networking, Telecom Tools
Other Networking Equipment
Print Servers, Wired
Racks, Mounts & Patch Panels
Router Components, Memory
Routers, Wired
Security, Firewall, VPN
Server Components, Memory
Servers
Software
Software, Operating Systems
Storage Equipment, NAS, SAN
Switch Components, Memory
Switches
Telephone Systems, Telecom
UPS, Power Protection, APC
Wholesale Lots
Wireless Networking, WiFi
Workstation Components,...
Workstations, Terminals
Compaq
Dell
HP
IBM
Other Brands
Silicon Graphics, SGI
Sun
Wyse, Other Terminals

Historical

Early user terminals connected to computers were generally electromechanical teleprinters (TTYs), such as the model 33 Teletype. However these were too slow for most production uses. By the early 1970s, many in the computer industry realized that an affordable video data entry terminal could supplant the then ubiquitous punch cards and permit new uses for computers that would be more interactive. The problem was that the amount of memory needed to store the information on a page of text was comparable to the memory in low end minicomputers then in use. Displaying the information at video speeds was also a challenge and the necessary control logic took up a rack worth of pre-integrated circuit electronics. One company announced plans to build a video terminal for $15,000 and attracted a large backlog of orders, but folded when their engineering plans, which included fabricating their own ICs, proved too ambitious. Another approach involved the use of the storage tube, a specialized CRT developed by Tektronix that retained information written on it without the need to refresh.

Early video computer displays were sometimes nicknamed "Glass TTYs" and used individual logic gates, with no CPU. One of the motivations for development of the microprocessor was to simplify and reduce the electronics required in a terminal. Most terminals were connected to mainframe computers and often had a green or amber screen. Typically terminals communicate with the computer via a serial line, often using the RS-232 serial interface. IBM systems communicated over a coaxial cable using IBM's SNA protocol.

Later, so called intelligent terminals were introduced, such as the VT52 and VT100 made by DEC, both of which are still widely emulated in software. These were called "intelligent" because they had the capability of interpreting escape sequences to position the cursor and control the display. Notable non-VT100 computer terminal types include the IBM 3270, various Wyse models (whose Wyse 60 was a best-seller—many are still in use), and the Tektronix 4014, but during the late 1970's there were dozens of manufacturers of terminals, many of which had incompatible command sequences. In the 1970s and early 1980s, the most common manufacturers were DEC, Wyse, Televideo, IBM, Lear-Siegler and Heath.

While early IBM PCs had single color green screens, these were not terminals. The screen of a PC did not contain any character generation hardware; all video signals and video formatting was generated by the video display card in the PC. With suitable terminal software PCs could, however, emulate a terminal, if connected to a mainframe computer. Eventually microprocessor-based personal computers greatly reduced the market demand for terminals. Today, most PC telnet clients provide emulation of the most common terminal—the DEC VT100.

Read more at Wikipedia.org