Other Power Devices

Solar power is the technology of obtaining usable energy from the light of the Sun. Solar energy has been used in many traditional technologies for centuries and has come into widespread use where other power supplies are absent, such as in remote locations and in space. more...

Home
Cables, Connectors
Filers, Load Balancers
Home Networking, Cable & DSL
Hubs
KVM Switch Boxes, Cables
Mainframe, DEC, VAX, AS/400
Network Interface Cards,...
Networking, Telecom Tools
Other Networking Equipment
Print Servers, Wired
Racks, Mounts & Patch Panels
Router Components, Memory
Routers, Wired
Security, Firewall, VPN
Server Components, Memory
Servers
Software
Software, Operating Systems
Storage Equipment, NAS, SAN
Switch Components, Memory
Switches
Telephone Systems, Telecom
UPS, Power Protection, APC
Battery Backup, Modules, UPS
Other Power Devices
Power Strips, Distribution
Power Supplies, Adapters
Wholesale Lots
Wireless Networking, WiFi
Workstation Components,...
Workstations, Terminals

Solar energy is currently used in a number of applications:

Heat (hot water, building heat, cooking); Electricity generation (photovoltaics, heat engines); Desalination of seawater.;

Its application is spreading as the environmental costs and limited supply of other power sources such as fossil fuels are realized.

Energy from the Sun

Solar radiation reaches the Earth's upper atmosphere at a rate of 1366 watts per square meter (W/m²). The first map shows how the solar energy varies in different latitudes.

While traveling through the atmosphere 6% of the incoming solar radiation (insolation) is reflected and 16% is absorbed resulting in a peak irradiance at the equator of 1,020 W/m². Average atmospheric conditions (clouds, dust, pollutants) further reduce insolation by 20% through reflection and 3% through absorption. Atmospheric conditions not only reduce the quantity of insolation reaching the earth's surface but also affect the quality of insolation by diffusing incoming light and altering its spectrum.

The second map shows the average global irradiance calculated from satellite data collected from 1991 to 1993. For example, in North America the average insolation at ground level over an entire year (including nights and periods of cloudy weather) lies between 125 and 375 W/m² (3 to 9 kWh/m²/day). This represents the available power, and not the delivered power. At present, photovoltaic panels typically convert about 15% of incident sunlight into electricity; therefore, a solar panel in the contiguous United States on average delivers 19 to 56 W/m² or .45 - 1.35 kWh/m²/day.

The dark disks in the third map on the right are an example of the land areas that, if covered with 8% efficient solar panels, would produce slightly more energy in the form of electricity than the total world primary energy supply in 2003. While average insolation and power offer insight into solar power's potential on a regional scale, locally relevant conditions are also important to the potential of a specific site.

After passing through the Earth's atmosphere, most of the sun's energy is in the form of visible and Infrared radiations. Plants use solar energy to create chemical energy through photosynthesis. Humans regularly use this energy burning wood or fossil fuels, or when simply eating the plants.

A recent concern is global dimming, an effect of pollution that is allowing less sunlight to reach the Earth's surface. It is intricately linked with pollution particles and global warming, and it is mostly of concern for issues of global climate change, but is also of concern to proponents of solar power because of the existing and potential future decreases in available solar energy. The order of magnitude is about 4% less solar energy available at sea level over the timeframe 1961–90, mostly from increased reflection from clouds back into outer space.

Read more at Wikipedia.org