|
Converters
A catalytic converter (colloquially, "cat" or "catcon") is a device used to reduce the toxicity of emissions from an internal combustion engine. more...
 Home
Cables, Connectors
Filers, Load Balancers
Home Networking, Cable & DSL
Hubs
KVM Switch Boxes, Cables
Mainframe, DEC, VAX, AS/400
Network Interface Cards,...
Networking, Telecom Tools
Other Networking Equipment
Print Servers, Wired
Racks, Mounts & Patch Panels
Router Components, Memory
 Cisco Components, Memory
Other Brand Components,...
 Converters
Network Modules (NM)
Other Router Components
Port Adapters (PA)
Power Supplies
Router Memory
Voice Interface...
WAN Interface Cards (WIC)
Routers, Wired
Security, Firewall, VPN
Server Components, Memory
Servers
Software
Software, Operating Systems
Storage Equipment, NAS, SAN
Switch Components, Memory
Switches
Telephone Systems, Telecom
UPS, Power Protection, APC
Wholesale Lots
Wireless Networking, WiFi
Workstation Components,...
Workstations, Terminals
First widely introduced on series-production automobiles in the US market for the 1975 model year to comply with tightening EPA regulations on auto exhaust, catalytic converters are still most commonly used in motor vehicle exhaust systems. Catalytic converters are also used on generator sets, forklifts, mining equipment, trucks, buses, trains, and other engine-equipped machines. A catalytic converter provides an environment for a chemical reaction wherein toxic combustion by-products are converted to less-toxic gases.
Functions
Three-way catalytic converters
A three-way catalytic converter has three simultaneous tasks:
Reduction of nitrogen oxides to nitrogen and oxygen: 2NOx → xO2 + N2;
Oxidation of carbon monoxide to carbon dioxide: 2CO + O2 → 2CO2;
Oxidation of unburnt hydrocarbons (HC) to carbon dioxide and water: CxHy + nO2 → xCO2 + mH2O;
These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running at the stoichiometric point. This is 14.7 parts oxygen to 1 part fuel, by weight, for gasoline (the ratio for LPG, natural gas and ethanol fuels is slightly different, requiring modified fuel system settings when using those fuels). When there is more oxygen than required, then the system is said to be running lean, and the system is in oxidizing condition. In that case, the converter's two oxidizing reactions (oxidation of CO and hydrocarbons) are favoured, at the expense of the reducing reaction. When there is excessive fuel, then the engine is running rich. The reduction of NOx is favoured, at the expense of CO and HC oxidation. If an engine could be held at the strict stoichiometric point for the fuel used, it is theoretically possible to reach 100% conversion efficiencies.
Since 1981, three-way catalytic converters have been at the heart of vehicle emission control systems in North American roadgoing vehicles and are also used on "Large Spark Ignition" engines. LSI engines are used in forklifts, aerial boom lifts, ice resurfacing machines and construction equipment. The converters used in these are three-way types designed to reduce combined NOx+HC emissions from 12 gram/BHP-hour to 3 gram/BHP-hour or less, per the Environmental Protection Agency (EPA) 2004 regulations. A further drop to 2 gram/BHP-hour of NOx+HC emissions is mandated in 2007 (note: NOx is the industry standard short form for nitric oxide (NO) and nitrogen dioxide (NO2) both of which are smog precursors. HC is the industry short form for hydrocarbons). The EPA intends to introduce emissions rules for stationary Spark Ignition engines, to take effect in January 2008.
Read more at Wikipedia.org
|
|
Contact
