|
Cisco 7200 Series
Cisco IOS (originally Internetwork Operating System) is the software used on the vast majority of Cisco Systems routers and all current Cisco network switches. more...
 Home
Cables, Connectors
Filers, Load Balancers
Home Networking, Cable & DSL
Hubs
KVM Switch Boxes, Cables
Mainframe, DEC, VAX, AS/400
Network Interface Cards,...
Networking, Telecom Tools
Other Networking Equipment
Print Servers, Wired
Racks, Mounts & Patch Panels
Router Components, Memory
Routers, Wired
 3Com
Cabletron
Cisco
 Cisco 1600 Series
 Cisco 1601
Cisco 1602
Cisco 1603
Cisco 1604
Cisco 1605
Other Cisco 1600 Series
Cisco 1700 Series
Cisco 1720
Cisco 1721
Other Cisco 1700 Series
Cisco 2500 Series
Cisco 2501
Cisco 2502
Cisco 2503
Cisco 2504
Cisco 2507
Cisco 2511
Cisco 2514
Cisco 2524
Cisco 2525
Other Cisco 2500 Series
Cisco 2600 Series
Cisco 2610
Cisco 2611
Cisco 2612
Cisco 2620
Cisco 2621
Cisco 2650
Other Cisco 2600 Series
Cisco 3600 Series
Cisco 3620
Cisco 3640
Other Cisco 3600 Series
Cisco 3700 Series
Cisco 7000 Series
Cisco 7200 Series
Cisco 7204
Cisco 7206
Other Cisco 7200 Series
Cisco 7500 Series
Cisco 7204
Cisco 7505
Other Cisco 7500 Series
Cisco 800 Series
Cisco Voice Over IP, VolP
Other Cisco Routers
D-Link Professional Routers
Efficient Networks
Extreme
Foundry
HP, Hewlett Packard
Juniper
Linksys Professional Routers
Lucent, Ascend
Marconi / Fore Systems
Netgear Professional Routers
Nortel, Bay Networks
Other Routers
Redback
SMC
Security, Firewall, VPN
Server Components, Memory
Servers
Software
Software, Operating Systems
Storage Equipment, NAS, SAN
Switch Components, Memory
Switches
Telephone Systems, Telecom
UPS, Power Protection, APC
Wholesale Lots
Wireless Networking, WiFi
Workstation Components,...
Workstations, Terminals
IOS is a package of routing, switching, internetworking and telecommunications functions tightly integrated with a multitasking operating system. The first IOS was written by William Yeager.
Cisco IOS has a characteristic command line interface (CLI), whose style has been widely copied by other networking products. The IOS CLI provides a fixed set of multiple-word commands -- the set available is determined by the "mode" and the privilege level of the current user. "Global configuration mode" provides commands to change the system's configuration, and "interface configuration mode" provides commands to change the configuration of a specific interface. A typical command may be "show interface fa0/48" or "no ip cef traffic-statistics". All commands are assigned a privilege level, from 0 to 15, and can only be accessed by users with the necessary privilege. Through the CLI, the commands available to each privilege level can be defined.
Versioning
Cisco IOS versions are versioned using three numbers and some letters, in the general form a.b(c.d)e, where
a is the major version number of the release;
b is the minor version number;
c is the release number, which begins at one and increments as new releases in the same a.b train are released;
d (omitted from general releases) is the interim build number;
e (zero, one or two letters) is the release train identifier, such as none (which designates the mainline, see below), T (for Technology), E (for Enterprise), S (for Service provider), XA as a special functionality train, XB as a different special functionality train etc.;
For example, release 12.3(1) is the first mainline Cisco IOS release of version 12.3. 12.3(2) is the next release, and so on. 12.3(1)T is the first release of the T train, 12.3(2)T the next, and so on. Interim builds are candidates for the next release, and are frequently made available by Cisco support as a faster way to provide fixes for bugs before the next release is available. For example, 12.3(1.2)T is the 2nd interim build after release 12.3(1)T.
Rebuilds - Often a rebuild is compiled to fix a single specific problem or vulnerability for a given IOS version. For example, 12.1(8)E14 is a Rebuild, the 14 denoting the 14th rebuild of 12.1(8)E. Rebuilds are produced to either quickly repair a defect, or to satisfy customers who do not want to upgrade to a later major revision because they may be running critical infrastructure on their devices, and hence prefer to minimise change and risk.
Interim releases - Are usually produced on a weekly basis, and form a roll-up of current development effort. The Cisco advisory web site may list more than one possible interim to fix an associated issue (the reason for this is unknown to the general public).
Read more at Wikipedia.org
|
|
